CRL Switch
lever switch 5-way, original vintage Fender USA
€ 17,50
Made in USA. Three way switch used for Telecasters® and other two pickup guitars. Five way switch used for Stratocasters® and other three pickup guitars. Mounting screws included.1 5/8" bolt spacing
Switch tip not included.
Switchcraft Gibson Style Toggle Switch
for thin body guitars (SG, Explorer, Firebird)
€ 25,-
Switchcraft L-shaped. Includes knurled dress nut.
Switch tip not included.
Switchcraft Straight Toggle Switch.
€ 25,-
Switchcraft straight toggle switch. Includes knurled dress nut.
Switch tip not included
Switchcraft Gibson Style Toggle Switch, Short
€ 19,95
Includes knurled dress nut.
Switch tip not included.
Deep Thread Round Nut for Switchcraft Switches
switch nut, deep knurled, for thick top guitars
made in USA
250K audio potentiometer, standard length bushing .375", 3/8" diameter
Value:
Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistence value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.
Taper:
The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume an audio or logarithmic pot will work best for volume applications.
Shaft:
A split, knurled shaft will hold most knobs. Sometimes the knob is mounted using a set screw. You should order a solid shaft pot, or align the set screw with the split for correct mounting.
Bushing:
The standard bushing diameter is 3/8" or 9,5mm, used in most made in USA guitars. Another industry standard is M8, as used by guitar builders outside of the USA. When space is limited mini pots are used with a shaft diameter of 7mm.
The standard bushing length is .375" for inch type pots and 10mm for metric type pots. Using two nuts it is very easy to set the correct bushing length for knob placement. Specially for pickguard (ST, PB) or control plate mount (TE, JB) the .250" short bushing will fit perfectly using only one nut.
For use with a thick or carved top (LP USA) you should order a bushing length of .750".
CTS is (and has been since the 50's) a factory standard for most USA brands like Fender and Gibson.
€ 15,-
DUE TO ARRIVE!
Fast, faster, fastest is what it's all about.
When Yngwie Malmsteen turned to Seymour Duncan to improve and refine his pickups— the YJM Fury™Signature Model for Strat®—it made sense to refine another important part of his playing volume potentiometer.
With his highly refined technique and exacting attention to sound, Yngwie employs the volume pot to take complete control of his phrasing dynamics. He uses his pinkie finger to flip the volume on and off for dramatic, lightning-fast starts and stops.
That's why Yngwie's YJM High-Speed Volume Potentiometer contains a minimal-viscosity lubricant for fast-action potentiometer turns.
At its core, the YJM High-Speed Volume Pot is a high-quality 250k. or 500k. Bourns® potentiometer customized for Yngwie.s playing needs. The split-shaft design of the post can accommodate a variety of knobs.
For: The guitarist who wants fast, dynamic phrasing control.
Instrument: Any electric guitar, including Strat®-style and dual-humbucker guitars.
Player: Yngwie J. Malmsteen
- 250k or 500k
- High Speed Audio Taper
- Split Shaft
- Manufactured specifically for Seymour Duncan by Bournes.
Powered by Maakum Websites